304 316 factory sale 60 80 100 mesh stainless steel wire mesh

What Is Woven Wire Mesh?
Woven wire mesh products, also known as woven wire cloth, are woven on looms, a process that is similar to the one used to weave clothing. The mesh can consist of various crimping patterns for the interlocking segments. This interlocking method, which entails the precise arrangement of the wires over and under one another prior to crimping them into place, creates a product that’s strong and reliable. The high-precision manufacturing process makes woven wire cloth more labor-intensive to produce therefore it is typically more expensive than welded wire mesh.

Materials
Carbon Steel: Low,Hiqh,Oil Tempered
Stainless Steel: Non-Magnetic Types 304,304L,309310,316,316L,317,321,330,347,2205,2207,Magnetic Types 410,430 ect.
Special materials: Copper, Brass, Bronze, Phosphor Bronze,red copper,Aluminum,Nickel200,Nickel201, Nichrome,TA1/TA2,Titanium ect.

Woven Wire Weave Styles
For the plain dutch weave, the shute wire is woven closely to the previous wire in a plain weave manner (1/1). This simple dutch weave is the most common filter cloth. We can achieve special filtration effects and micron ratings by varying the diameter and tightness of the wire. The warp wires are thicker than the weft wires in this type of weave.
The name reversed dutch weave – also called PZ mesh – originates from the reversed size ratio of the warp & weft wires. In this filter weave, the warp wires are thinner compared to the weft wires. This type of weave has a high load capacity in warp direction due to a large number of warp wires next to each other. We can weave it as a plain or twilled weave. The pores are aligned diagonally to the mesh surface.
Twill dutch weave (2/2) is more closely woven than the plain weave. This filter cloth can achieve lower micron ratings. Typically, the cloth surface is smoother than that of the simple dutch weave.
Atlas weave is a twill weave in which respectively four wires are woven up and one wire down. The result is a smooth surface on one side and a rough surface on the other. In parts, the pores are rectangular, partly triangular.The atlas weave is often preferred when the filter cake should be easily removable because this cloth has a very smooth surface.

Stainless steel wire mesh products uses:
Chemicals: acid solution filtration, chemical experiments, chemical particulate filter, gas filter corrosive, caustic dust filtration
Oil: oil purification, oil mud filtration, separation of impurities, etc.
Medicine: Chinese medicine decoction filtration, the solid particulate filtration, purification, and other drugs
Electronics: Circuit board framework, electronic components, battery acid, radiation module
Printing: Ink filtration, carbon filtration, purification, and other toners
Equipment: vibrating screen

Common specifications of woven mesh

Mesh Wire Dia. (inches) Wire Dia. (mm) Opening(inches) Opening(mm)
1 0.135 3.5 0.865 21.97
1 0.08 2 0.92 23.36
1 0.063 1.6 0.937 23.8
2 0.12 3 0.38 9.65
2 0.08 2 0.42 10.66
2 0.047 1.2 0.453 11.5
3 0.08 2 0.253 6.42
3 0.047 1.2 0.286 7.26
4 0.12 3 0.13 3.3
4 0.063 1.6 0.187 4.75
4 0.028 0.71 0.222 5.62
5 0.08 2 0.12 3.04
5 0.023 0.58 0.177 4.49
6 0.063 1.6 0.104 2.64
6 0.035 0.9 0.132 3.35
8 0.063 1.6 0.062 1.57
8 0.035 0.9 0.09 2.28
8 0.017 0.43 0.108 2.74
10 0.047 1 0.053 1.34
10 0.02 0.5 0.08 2.03
12 0.041 1 0.042 1.06
12 0.028 0.7 0.055 1.39
12 0.013 0.33 0.07 1.77
14 0.032 0.8 0.039 1.52
14 0.02 0.5 0.051 1.3
16 0.032 0.8 0.031 0.78
16 0.023 0.58 0.04 1.01
16 0.009 0.23 0.054 1.37
18 0.02 0.5 0.036 0.91
18 0.009 0.23 0.047 1.19
20 0.023 0.58 0.027 0.68
20 0.018 0.45 0.032 0.81
20 0.009 0.23 0.041 1.04
24 0.014 0.35 0.028 0.71
30 0.013 0.33 0.02 0.5
30 0.0065 0.16 0.027 0.68
35 0.012 0.3 0.017 0.43
35 0.01 0.25 0.019 0.48
40 0.014 0.35 0.011 0.28
40 0.01 0.25 0.015 0.38
50 0.009 0.23 0.011 0.28
50 0.008 0.20` 0.012 0.3
60 0.0075 0.19 0.009 0.22
60 0.0059 0.15 0.011 0.28
70 0.0065 0.17 0.008 0.2
80 0.007 0.18 0.006 0.15
80 0.0047 0.12 0.0088 0.22
90 0.0055 0.14 0.006 0.15
100 0.0045 0.11 0.006 0.15
120 0.004 0.1 0.0043 0.11
120 0.0037 0.09 0.005 0.12
130 0.0034 0.0086 0.0043 0.11
150 0.0026 0.066 0.0041 0.1
165 0.0019 0.048 0.0041 0.1
180 0.0023 0.058 0.0032 0.08
180 0.002 0.05 0.0035 0.09
200 0.002 0.05 0.003 0.076
200 0.0016 0.04 0.0035 0.089
220 0.0019 0.048 0.0026 0.066
230 0.0014 0.035 0.0028 0.071
250 0.0016 0.04 0.0024 0.061
270 0.0014 0.04 0.0022 0.055
300 0.0012 0.03 0.0021 0.053
325 0.0014 0.04 0.0017 0.043
325 0.0011 0.028 0.002 0.05
400 0.001 0.025 0.0015 0.038
500 0.001 0.025 0.0011 0.028
635 0.0009 0.022 0.0006 0.015